Machine tool adjustment pad iron is a kind of adjustment equipment that transfers the weight of the equipment to the foundation and can also level the equipment through its thickness.The machine tool adjusting pad iron can improve the dynamic characteristics of the machine tool and improve the machining accuracy of the machine tool.The adjusting pad iron has the functions of shockproof and noise reduction,solving the contradiction that the ground foundation cannot be determined due to the difficulty in selecting equipment for the design department.The machine tool adjustment pad has a wide range of versatility,suitable for installing various machine tools and equipment on the ground and in the upstairs workshop.

 

　　Use method of machine tool adjusting pad iron:

 

　　1.The foundation plane for installing the machine tool can be concrete or wooden,and it is required to be flat and solid.

 

　　2.During installation,screw out the adjusting screw,place the machine tool on the load plate of the sizing block,and then screw in the screw from above.

 

　　3.Adjust the level of the machine tool guide rail.When rotating clockwise,the machine tool rises,and when rotating counterclockwise,the machine tool falls.After adjustment,press the nut tightly.

 

　　4.The machine tool can be installed in place without burying anchor bolts,shortening the installation cycle and saving installation costs.