The three-layer shockproof pad iron is a shockproof and shockproof device installed on the foundation of the machine tool equipment.The three-layer shockproof pad iron is composed of an inner bracket,a rubber pad,an outer seat,an adjustment disk,and a screw.Use method of three-layer shockproof pad iron:Put the required pad iron under the anchor hole of the machine tool,and insert the bolt,

 

　　Rotate until it is firmly in contact with the load bearing plate,and then adjust the machine tool level(the bolt rotates clockwise,and the machine tool rises):After adjusting the machine tool level,tighten the nut to fix the horizontal state.Due to the creep phenomenon of rubber,when adjusting the sizing block for the first time,adjust the machine tool level again two weeks later.

 

　　The load of the machine tool equipment is transmitted to the rubber pad through the adjusting disc and inner bracket,which can effectively prevent the longitudinal vibration of the machine tool equipment;The adjustment plate can adjust the lifting and lowering of the machine tool equipment and significantly improve the load capacity of the sizing block;The outer seat is fixed to the concrete floor through expansion screws,which can effectively reduce the lateral vibration of the machine tool equipment.

 

　　Three-layer shockproof pad iron product features:Damping rubber effectively attenuates the vibration of the machine itself,reduces the external transmission of vibration force,and prevents the introduction of vibration.It is not necessary to install foundation bolts to fix the machine tool to the ground.