2023-02-17 20:15:00 hits：
Place the required sizing block under the anchor hole of the machine tool, insert the bolt, screw it until it firmly contacts the load bearing plate, and then adjust the machine tool level (the bolt rotates clockwise, and the machine tool rises): After adjusting the machine tool level, tighten the nut to fix the horizontal state. Due to the internal creep phenomenon of rubber, when the pad iron is first used, it is adjusted again after two weeks. The machine tool level pad iron is a shockproof and shockproof device installed on the foundation of the machine tool equipment, consisting of an inner support, a rubber pad, an outer seat, an adjustment disk, and a screw. The load of the machine tool equipment is transmitted to the rubber pad through the adjusting plate and inner bracket, which can effectively damp the longitudinal vibration of the machine tool equipment; The adjustment plate can adjust the lifting and lowering of the machine tool equipment and significantly improve the load capacity of the sizing block; The outer seat is fixed to the concrete floor through expansion screws, which can effectively reduce the lateral vibration of the machine tool equipment. The pad iron utility model has a simple structure and high load capacity, which can effectively prevent or reduce the vibration of machine tool equipment, and can be widely used as a shockproof and vibration damping device for various machine tool equipment.
previous_page：{$previous page[title]}
next page：What benefits can machine tool sizing blocks bring to machine tool equipment?
